TITLE: BACOENG 1/2HP Clean/ Dirty Water Submersible Sump Pump 2000GPH w/ 33FT Cable AUTOMATIC FLOAT SWITCH:The pump with a float switch can control start/stop Automatically.when the water level is below the initial level( ≤3.9 inches), it will automatically disconnect the power and stop working;When the water level ri
Description
TITLE: BACOENG 1/2HP Clean/ Dirty Water Submersible Sump Pump 2000GPH w/ 33FT Cable
- AUTOMATIC FLOAT SWITCH:The pump with a float switch can control start/stop Automatically.when the water level is below the initial level( ≤3.9 inches), it will automatically disconnect the power and stop working;When the water level rises above the initial level( ≥20.8 inches), the pump will start working automatically under the control of the float switch.
- HIGHER BASE PLATE: The higher base plate assures the prevention of debris collection in the sump pit
- MULTI FITTING ELBOW: THREE bore sizes of hoses/pipe fittings: 23mm, 32mm, 46mm, choose from according to the flow rate
- EXTRA LONG AND SEALED CORD: The power cable is 33FT, which allows the pump to move easily. In addition,the cord is sealed especially in order to prevent electrical short circuits while under water.
- One Year Warranty: A necessity of every house, Never worry again that your dry basement will be effected on rainy days or any day that the underground water table rises. GREAT for flooded area, swimming pool, pond.
PRODUCT INFORMATION
Material: Metal, Thermoplastic
Voltage/Frequency:115V/60HZ
Horsepower: 1/2 HP, Max Flow Rate: 2000GPH
Max Lift: 16.4 Feet
Power Cord Length: 33 Feet
Discharge Size: 1.5"
Warranty: one-year
Package size: 8.7 x 6.7 x 13.5 inches(L X W X H)
PRODUCT FEATURES
Available Places: Swimming pool, Pond, flooded area.
The thermoplastic body protects the metal parts from corrosion.
The pump gives you the excellent ability to drain cellars, swimming pool or garden ponds.
Thermal overload protection makes sure the pump operates within spec for longer durability.
Package Content: 1 x Clean Water Pump, 1 x User Manual
Operation Tips
The max flow is of the pump is 2000gallon/H (7500L/H). But the height should be close to 0 meter and use the discharge port of 1.5inch.
That means if you want the flow be bigger, the height of the water you put the water pump into should be lower, and using the 1.5inch discharge port.
Notice: the floating ball must be kept up when the pump works. once the floating ball is down to the initial water level (about 3.9inch), the pump will automatically shut down. When the water level is below 3.9inch and above 1.57inch, you must hang the float up to continue the pump working. The minimum level floating ball can be drawn to is about 1.57inch. When the water level is below 3.9inch, it is best for us to take care of the pump, so that once the pump can not pump any water,the power must be cut off immediately.
Reviews
We Also Recommend